Home | Superiority | Specification | New Products | Vendor | Carrer | Contact us | Enquiry | E-mail
 

1. LIQUID ferric CHLORIDE:-

Liquid ferric Chloride solution of Iron III Chloride (FeCl3) in water. It is manufactured by virgin raw material in an oxidation process using chlorine and Ferrous Chloride solution.

 
2. ANHYDROUS ferric CHLORIDE:-

Our ferric chloride is prepared by direct chlorination of iron with chlorine and product is collected after condensation of sublimed products. Thus the process conditions are adjusted in such a way that material of highest purity is obtained.

 
3. LIQUID FERROUS CHLORIDE:

Liquid Ferrous Chloride is a concentrated solution of Iron II Chloride (FeCl2) from high purity raw materials. It is the result of the dissolution of Iron Oxide and Iron in Hydrochloric acid.

 

121. LIQUID REPLINISHER :-

Kanha Products Pvt. Ltd. 121 replinisher is the first etch ant of the alkaline etchant class to combine high etching rates; superior line definition; low undercutting; banking and speed additives; and to be specifically designed to be environmentally safer.


APPLICATION OF ferric CHLORIDE:-

ferric Chloride Anhydrous is hydrolyzed in dilute solution forming a precipitate of ferric Oxide. This precipitate absorbs suspended particles (clay, organic matter, etc) flocculates and carries the absorbed particles to the bottom. It also removes sulphides and silica.

It increase the rate of settling of sludge in sewage by the process of hydrolysis forming ferric Hydroxide which acts as a coagulant.
 

Generally industrial effluents are either acidic or alkaline and the treatment of such effluents is usually a costly and cumbersome multi-stage operation requiring a number of chemicals. ferric Chloride Anhydrous because of its flocculating and deodorizing properties, can be used directly in a single stage operation replacing the traditional cumbersome process.

To release entrapped oil from crevices and rocks below the sea bed ferric Chloride Anhydrous can be used by feeding it into the drilling well. It decomposes and reacts with the rocks, releasing the entrapped oils which are removed by the normal processes.
 

OTHERS USES:-
ferric CHLORIDE ANHYDROUS CAN BE USED:- 

As an etching agent for photo engraving and printed circuitry

To produce decorative surface effects on ceramics.

In the manufacture of glycerin.

As a catalyst, mordant, oxidizing, chlorination and condensing agent.

As a disinfectant, pigment and cattle feed-additive.

 
   
 
  PRODUCTS | PROFILE | QUALITY POLICY | MSDS | SALES NETWORK | EXPORT | FEEDBACK | ENQUIRY