Home | Superiority | Specification | New Products | Vendor | Carrer | Contact us | Enquiry | E-mail
 
  MATERIAL SAFETY DATA SHEET OF FERRIC CHLORIDE
  1. CHEMICAL IDENTIFICATION:  
Name Ferric Chloride Solution (40%+)
Synonyms Iron chloride, Iron III Chloride, Iron Tri Chloride
CAS # 7705-08-0
Formula FeCl3
Molecular Wt. 162.2 (100% Basis)
Chemical Classification Inorganic Acidic Salt, Solution
ITC Number 28273300
BIS No. IS 711:1970
CAS No. 7705-08-0
EINECS No. 231-729-4
     
  2. PHYSICAL AND CHEMICAL DATA:-  
Form Liquid Solution with 40 % ferric Chloride in water
Specific Gravity 1.42
Appearance Dark Brown Liquid
Boiling Point 106C (223
PH <2 (less then 2)
Solubility in Water :Complete
Vapour Pressure 40 mmHg @ 35° C
% Volatile 55-73% (Water)
Evaporation Ratio None Found
Odor Slightly Acidic
     
     
  3. FIRE & EXPLOSION HAZARD DATA:-  
Flash Point N.A.
Autoignition N.A.
Flammable limit in Air None
Hazard Class Non Flammable
Extinguishing media Will not burn; use appropriate material for surrounding fire
     
  4.  REACTIVITY  
Stability Stable
Decomposition Will not occur
Polymerization Will not occur
Incompatibility Rapid corrodes most metal avoid contact with nylon, Aluminum/Aluminum alloy Carbon Steel, Stainless Steel and Copper alloys.
     
     
  5.  EMERGENCY & FIRST AID DATA-  
Contact with Skin
Wash with water, remove contaminated clothing. If there
is skin irritation, get medical attention.
Contact with Eyes
Wash with large amount of water, lifting the eyelids occasionally. Get medical attention immediately.
Ingestion<
An antidote should be taken immediately, such as sodium bicarbonate or anti acid tablets to neutralize the acidity of ferric Chloride. Drink plenty of water but do not induce vomiting. Consult a doctor.
     
  6.  PREVENTIVE MEASURES  
Ventilation Work area should be properly ventilated
Clothing Appropriate clothing to prevent contact of the liquid with the skin; use rubber gloves to protect hands
Eye-protection Use safety glass or goggles to prevents eye contact with the solution. Eyewash should be available in the work place.
Incompatibility Rapid corrodes. Most metal avoid contact with nylon, Aluminum/Aluminum alloy Carbon Steel, Stainless Steel and Copper alloys.
     
  7.   SPILLS, LEAKS AND DISPOSAL PROCEDURE- Spilled ferric Chloride should be flushed out with water.
     
     
  8.  MANUFACTURER, SUPPLIERS DATA  
Manufacturer Kanha Products Pvt. Ltd. Delhi (India).
     
 
  PRODUCTS | PROFILE | QUALITY POLICY | MSDS | SALES NETWORK | EXPORT | FEEDBACK | ENQUIRY